FAXE LYE ORIGINAL
Product Description:
Faxe Lye Original stops the process of the wood work darkening and leaves a light coloured finish which is characteristic for lye treated surfaces. Faxe Lye Original preserve the light pale colour of the natural wood and enhances vains and the core wood.
Application:
Faxe Lye Original is applied to new untreated or newly sanded wood work such as floors, wall panels, table tops, doors, furniture - everywhere to preserve the light pale colour of new and natural wood. Faxe Lye original is only used on pine. We recommend a test before application.
User Guide:
-
Wood work must be clean and dry. Dirty surfaces should be cleaned thoroughly with Faxe Woodcleaner.
-
Shake the container before and during use.
-
The lye is easily applied with a lye brush or a T-handle with a cotton cover, in an even layer in a longitude direction. Even out overlappings while the woodwork is still wet. Use suitable protective gloves and glasses during application.
-
When the woodwork is dry, another application of lye might be necessary to obtain the right colour. This will provide the lightest result and the best protection against darkening.
-
Floor boards, furniture, table tops etc. should have an aftercare treatment to be effectively protected against dirt and liquids.
Aftercare Treatment:
Soap treatment is recommended where a beautiful, silk matt and natural finish is desired.
Faxe Floorsoap White leave the wood work with a light, white washed finish, and
Faxe Floorsoap Natural gives the wood work a natural light golden finish.
Tips!
A wooden floor should be smooth and delicious. To avoid the wood work form raising when applying lye, the wood should be washed with
Faxe Wood Cleaner and water (1:40) before lye application. When the wood is dry, sand the surface with a fine sandpaper - grade 120 or a sanding net. The woodwork is now ready for the lye treatment.
Specifikations for Faxe Lye Original :
| Specifications: |
|
Cover Range: |
|
Ca. 8-12 m2/l |
|
Storage |
|
+5-30°C |
|
Shelf Life |
|
Un-opened 5 år |
|
Drying Time |
|
ca. 5 hours at 20°C. |
|
pH-value |
|
9 |
Declaration:
Natriumhydroxid <0,5%, vegetable oils, natural wax and titandioxid.
Tools should be cleaned with water
Avoid contact with skin and eyes. Use suitable protective gloves during application.
KEEP UNDER LOCK AND AWAY FROM CHILDREN.
Click here for safety data sheet
